York County, Maine
Acid Neutralizers in Wells, ME
Call (800) 696-9355 or request a visit. Monday to Friday, 8:00 AM to 5:00 PM.
Low pH is a common condition in private wells across York County. For a Wells household, a calcite bed or a chemical feed brings acidic water back toward neutral so the plumbing lasts and the water is safer in contact with copper.
Acid Neutralizers for Wells homes
Many homes beyond the main corridor are on private wells, and some neighborhoods have no public water at all. Sandy coastal soils and shallow groundwater make some wells sensitive to rainfall, drought and nearby septic systems.
Wells near the marsh or shore can show changes in sodium and chloride, and iron is a common companion in this kind of ground. Kennebunk and York flank the town and Berwick and Sanford are inland, so Wells connects coastal and country water situations.
What we see in York County wells
Coastal sand and granite offer little natural buffering, so shallow and sandy wells near the shore can run acidic. Around Wells beaches, marsh and inland roads, we test pH in Wells wells that have never been checked, particularly where plumbing is copper.
What to test first in Wells
- Hardness, because neutralizers add some
- Iron and manganese, which can foul calcite or complicate the design
- Arsenic, uranium and radon if the well is drilled into bedrock
How it works
How we handle acid neutralizers, step by step
- 1
Read pH and alkalinity
A pH test is quick, but we like it backed by a lab result. Together they tell us whether a calcite bed will do the job or a chemical feed is a better fit.
- 2
Pick calcite or chemical feed
Calcite beds suit moderate acidity and are simple to maintain. Soda ash feeds suit stronger acidity and low flows. We recommend one based on your numbers and your tolerance for upkeep.
- 3
Install ahead of other equipment
We set the tank, connect supply and backwash lines and flush the media. In Wells basements, we position valves where they can be reached without moving anything.
- 4
Refill and check
A retest of pH a few weeks after startup confirms the neutralizer is performing. We make small adjustments, then set an annual check.
What shapes the job in Wells
Copper is the quiet victim of acidic water. Along with pH, we like to measure copper at the tap, because it shows how much the plumbing has already given up. For houses near Wells beaches, marsh and inland roads, that is a useful baseline for the retest.
Signs of acidic water
- Blue-green stains around faucets, drains and fixtures
- Pale or green-tinted hot water after sitting overnight
- A neighbor with corroded copper pipes
- An older home with copper lines and a bedrock well
If blue-green stains are showing up in Wells, call or send a request. We will test pH and talk through a neutralizer, and we also work in York and Kennebunkport.
Acid Neutralizers in Wells?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.