
Testing and inspection
Well camera inspections: see what is down there
A submersible camera shows casing, seals, sediment and what is happening down the hole.
When a well misbehaves, the cause is usually out of sight. A submersible camera on a cable lets us look at the casing, the seams, the pitless adapter connection and the bottom of the hole, and record video you can watch afterward. That turns a guess into a diagnosis.
Problems the camera can reveal include cracked or corroded casing, sand or gravel entering the well, blocked openings, debris or a dropped object, scale and buildup, and signs that a pump has been set too low or too high. For homebuyers it shows whether an older well is in the shape the seller says it is.
We rely on the footage to recommend repair, liner installation or cleaning, and to avoid work that will not solve the actual problem.
Inside the well
What is down the hole
When a camera makes sense
- Sand, grit or cloudy water coming from a well
- Falling flow or a pump that cycles oddly
- A well of unknown age or history
- Before buying a home with an older well
- After any well repair, to confirm the work


How it works
What happens, step by step.
- STEP 1
Pull access
We open the well cap safely and, if needed, lift the pump.
- STEP 2
Lower the camera
Recording from the top of the casing to the bottom.
- STEP 3
Review
We go over the footage with you.
- STEP 4
Recommend
Repair, rehabilitation or leave it alone.
Footage you keep
A recording is useful later, for a repair estimate, a warranty question or a sale.
Questions
Common questions about well camera inspections.
Do not see yours? Call (800) 696-9355 and ask.
Serving towns including Kennebunk, Kennebunkport, Rochester, York, Limington and more.
Can the camera see through murky water?
Will you need to pull my pump?
Is it safe for a deep bedrock well?
Not sure what is in your water?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.

