York County, Maine
Hydrofracturing in Kennebunk, ME
Call (800) 696-9355 or request a visit. Monday to Friday, 8:00 AM to 5:00 PM.
A bedrock well delivers water through cracks in the rock, and when those cracks are few or clogged, a well in Kennebunk can deliver only a trickle. Hydrofracturing uses controlled water pressure to widen existing fractures and open new ones.
Hydrofracturing for Kennebunk homes
Kennebunk includes a historic village, the Mousam and Kennebunk rivers, long beaches and wooded country roads running back inland. River valleys and coastal sand deposits make some wells shallow and responsive, while upland lots tend to need drilled bedrock wells.
Shore-side properties can see sodium and chloride in wells after long dry periods, which is worth knowing before choosing treatment. Many houses mix year-round residents with summer visitors, so water systems see uneven demand through the year.
What we see in York County wells
Coastal bedrock wells can be limited by fracture density, and hydrofracturing may help in a low-yield rock well. Near Kennebunk's river valleys and coastal edge, we take care to consider salt influence, since opening new fractures can change the water that a Kennebunk well draws.
What we check first in Kennebunk
- Yield before treatment, from a timed flow test
- Bacteria and nitrate after the work is done
- Seasonal demand, to judge how much yield is enough
How it works
How we handle hydrofracturing, step by step
- 1
Evaluate the well
We review the well record, depth, recovery rate and past complaints. A flow test tells us how far the well falls short of your needs.
- 2
Prepare the well
The pump, wire and drop pipe are pulled, the hole is cleaned and the casing is checked. We make sure the well is ready for pressure work.
- 3
Fracture the rock
We work down the well in stages, treating each zone. The aim is to connect existing fractures to the hole and improve flow.
- 4
Test and finish
We run a yield test to measure the new flow and recovery, then reinstall the pump, pipe and wiring. A water sample is collected and sent to the lab.
What shapes the job in Kennebunk
The process requires the pump and piping to come out, the hole to be sealed with a packer and water to be injected at high pressure in sections. The treatment is controlled, and results are measured on a yield test afterward.
Signs a well may need more yield
- A pump that sucks air during heavy use
- Slow recovery after laundry or a long shower
- Water that turns cloudy when the well is pushed
- A well that has never been tested for flow
Atlantic Water Solutions offers hydrofracturing across York County, including Kennebunk and Saco. Ask for a visit and we will start with the well's history.
Other services in Kennebunk
Hydrofracturing nearby
Hydrofracturing in Kennebunk?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.