Cumberland County, Maine
PFAS Water Filtration in Gray, ME
Call (800) 696-9355 or request a visit. Monday to Friday, 8:00 AM to 5:00 PM.
PFAS are man-made chemicals that have turned up in private wells across New England, sometimes far from any obvious source. For a Gray home, filtration is the practical response once a lab test shows PFAS in the water.
PFAS Water Filtration for Gray homes
Beyond the commercial strip, the large majority of homes use private wells, from older shallow wells to modern drilled ones. Neighborhoods built in different decades have different pump, tank and well-depth histories, even a short distance apart.
Gorham, Standish, Freeport and New Gloucester surround the town, and the Norway area is a little farther northwest. Winter freeze-ups and spring melt put the most stress on pump houses and exposed lines, so that is when problems tend to surface.
What we see in Cumberland County wells
In inland Cumberland County, PFAS awareness has grown as more private wells have been sampled. Contamination can follow a particular source or turn up with no clear one, which is why every well near the Gray crossroads and its hill roads is best judged by its own lab result.
What to test first in Gray
- A treated-water sample after the system starts
- pH and hardness, which affect how media behaves
- A sediment check, so a prefilter can protect the media
How it works
How we handle PFAS water filtration, step by step
- 1
Collect a PFAS sample
A careful sample is the foundation. For a Gray well, we take it before any treatment so we can see exactly what the well produces.
- 2
Pick the media
If only drinking water needs treatment, we also discuss a point-of-use reverse osmosis system. We compare it with a whole-house bed in plain terms so you can decide.
- 3
Install and sample
The system goes on the main line after the pressure tank, with sample taps before and after the media. Backwash and bypass arrangements are set up according to the design.
- 4
Retest and replace media
A treated sample proves the design works, and follow-up tests catch the point where the media is tiring. We set a retest schedule and plan replacement before PFAS can break through.
What shapes the job in Gray
Contact time is critical. A bed that is too small lets contaminants through, so tanks are sized for your peak flow and for enough time in the media. We design for the demand in your house, not a generic number.
When to think about PFAS
- A well that has never been tested for PFAS
- News of PFAS in the water of a nearby town
- A change in nearby land use or old landfill activity
- A treatment system that was never verified
Curious whether PFAS is a question for your Gray well? A single test settles it, and we can explain how to collect the sample.
PFAS Water Filtration in Gray?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.