York County, Maine
Iron and Manganese Removal in Berwick, ME
Call (800) 696-9355 or request a visit. Monday to Friday, 8:00 AM to 5:00 PM.
Iron and manganese rarely threaten health at typical levels, but they ruin finishes, clog plumbing and shorten the life of a softener. For a York County home, the right filter protects every tap and every appliance on the line.
Iron and Manganese Removal for Berwick homes
Many homes outside the village are on private wells, and some neighborhoods mix older dug wells with newer drilled ones. Granite and metamorphic bedrock under the town makes arsenic, uranium and radon worth testing for in any drilled well.
Hard water and iron staining are common conversation starters, and some older wells also show a faint sulfur odor. York and Wells lie to the east and South Berwick to the south, with Rochester, New Hampshire, a short drive north, so service calls cross state lines often.
What we see in York County wells
Granite and metamorphic bedrock across inland York County releases iron and manganese into groundwater, and some wells carry more of one than the other. For a Berwick well, we test both and size the filter to the higher number.
What to test first in Berwick
- Iron, manganese and pH from the same sample
- Bacteria, including iron bacteria if the water looks slimy
- Arsenic and radon if the well is drilled into bedrock
How it works
How we handle iron and manganese removal, step by step
- 1
Test all four numbers
Numbers, not stains, drive the choice. We take a sample from a tap before any treatment, send it to the lab and read the report alongside what you have seen in the house.
- 2
Choose the filter
If bacteria or organic matter are involved, we adjust the plan to include disinfection or a different media. The filter should match the water, not the other way around.
- 3
Install with backwash
The tank is set on the main line, with a bypass, a drain connection for backwash and a power outlet for the control head. The first backwash is run by hand to clear the new media.
- 4
Service and recheck
We retest after startup and again after the first few months, because the real behavior of an iron filter shows over time. Any adjustment to the backwash schedule is made then.
What shapes the job in Berwick
If you also have a softener, the iron filter normally goes in front of it, which spares the resin and keeps the softener working properly. We plan the order from the pressure tank on, whether in a basement near the Salmon Falls River side of town or a utility room.
Signs of iron and manganese
- Orange or brown stains in sinks and toilets
- Water that runs clear, then turns orange standing in a glass
- A softener that fouls or loses capacity quickly
- A test showing iron or manganese over aesthetic limits
If stained fixtures are a daily annoyance in Berwick, call or send a request. A quick test is where we start, and we also work in Rochester and Wells.
Other services in Berwick
Iron and Manganese Removal nearby
Iron and Manganese Removal in Berwick?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.