York County, Maine
Iron and Manganese Removal in York, ME
Call (800) 696-9355 or request a visit. Monday to Friday, 8:00 AM to 5:00 PM.
Rust-orange stains and black flecks are the signature of iron and manganese, and plenty of wells in York deliver both. A purpose-built iron filter takes them out before they reach the fixtures, the laundry and the water heater.
Iron and Manganese Removal for York homes
York runs from rocky headlands and beaches back through woods and farmland to the Berwick line, and much of the town has no public water. Wells here are commonly drilled into folded coastal bedrock, where water travels through cracks rather than through porous soil.
Large seasonal swings in occupancy put real strain on small pumps and tanks that were sized for a smaller household. Wells and Kittery are the neighboring coastal towns, and Berwick lies inland, so York owners often compare notes across several water situations.
What we see in York County wells
Coastal ground is often rich in iron, particularly where marsh and clay sit near a well. Around the York shoreline and its back roads, we see iron in shallow and deep wells alike, and we pay attention to tannins and organic matter that can bind iron and defeat an ordinary filter.
What to test first in York
- Hardness, so we know whether a softener should follow the filter
- Total dissolved solids, as a general picture of the water
- Arsenic and radon if the well is drilled into bedrock
How it works
How we handle iron and manganese removal, step by step
- 1
Test all four numbers
Numbers, not stains, drive the choice. We take a sample from a tap before any treatment, send it to the lab and read the report alongside what you have seen in the house.
- 2
Choose the filter
The media bed, tank size and backwash flow are selected from your metals, your pH and the water you use at peak. A York County household with a big family needs a bigger bed.
- 3
Install with backwash
The tank is set on the main line, with a bypass, a drain connection for backwash and a power outlet for the control head. The first backwash is run by hand to clear the new media.
- 4
Service and recheck
A follow-up sample confirms the filter is catching iron and manganese. We explain how often the media needs attention and which parts of the control head are worth watching.
What shapes the job in York
If you also have a softener, the iron filter normally goes in front of it, which spares the resin and keeps the softener working properly. We plan the order from the pressure tank on, whether in a basement near the York shoreline and its back roads or a utility room.
Signs of iron and manganese
- Laundry that comes out yellowed or gray
- Water that runs clear, then turns orange standing in a glass
- Slime in toilet tanks or on fixtures
- A test showing iron or manganese over aesthetic limits
Orange water in your York home does not have to be permanent. Call, and tell us what you are seeing at the taps.
Iron and Manganese Removal in York?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.