
York County, Maine
Iron and Manganese Removal in Kennebunk, ME
Call (800) 696-9355 or request a visit. Monday to Friday, 8:00 AM to 5:00 PM.
If your Kennebunk water leaves orange rings in the toilet and brown streaks on white laundry, iron is the likely cause. We test for iron and manganese together, because the filter that works for one does not always catch the other.
Iron and Manganese Removal for Kennebunk homes
Homes away from the village center are generally on private wells, drilled or dug depending on the age of the house. River valleys and coastal sand deposits make some wells shallow and responsive, while upland lots tend to need drilled bedrock wells.
Kennebunkport and Arundel sit on either side, Wells is to the south and Sanford and Lyman lie inland. A buyer should look past the kitchen and ask about the pressure tank, the pump age and any water treatment that comes with the house.
What we see in York County wells
Coastal ground is often rich in iron, particularly where marsh and clay sit near a well. Around Kennebunk's river valleys and coastal edge, we see iron in shallow and deep wells alike, and we pay attention to tannins and organic matter that can bind iron and defeat an ordinary filter.
What to test first in Kennebunk
- Iron, manganese and pH from the same sample
- Sulfur or odor, in case a separate stage is needed
- Nitrate, a useful baseline for any private well

How it works
How we handle iron and manganese removal, step by step
- 1
Test all four numbers
Numbers, not stains, drive the choice. We take a sample from a tap before any treatment, send it to the lab and read the report alongside what you have seen in the house.
- 2
Choose the filter
The media bed, tank size and backwash flow are selected from your metals, your pH and the water you use at peak. A York County household with a big family needs a bigger bed.
- 3
Install with backwash
After the media is rinsed, we start the system and check that the treated water runs clear. Pressure and backwash flow are tested before we leave.
- 4
Service and recheck
A follow-up sample confirms the filter is catching iron and manganese. We explain how often the media needs attention and which parts of the control head are worth watching.

What shapes the job in Kennebunk
Common filters use oxidizing media, air injection or a chemical feed ahead of a tank that catches the particles. The right choice depends on how much iron and manganese there is, the pH and how much water your home uses at peak.
Signs of iron and manganese
- Orange or brown stains in sinks and toilets
- Water that runs clear, then turns orange standing in a glass
- A softener that fouls or loses capacity quickly
- A test showing iron or manganese over aesthetic limits
If stained fixtures are a daily annoyance in Kennebunk, call or send a request. A quick test is where we start, and we also work in Saco and Wells.
Other services in Kennebunk
Iron and Manganese Removal nearby
Iron and Manganese Removal in Kennebunk?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.

