York County, Maine
Whole-House Water Filtration in Arundel, ME
Call (800) 696-9355 or request a visit. Monday to Friday, 8:00 AM to 5:00 PM.
Homeowners in Arundel often tell us the water looks fine at the kitchen sink and is a problem everywhere else: stained tubs, a film on glassware, a smell in the shower. Whole-house filtration fixes that at the source, ahead of the water heater, and it is built from your lab results rather than a catalog guess.
Whole-House Water Filtration for Arundel homes
Arundel is a mostly rural town inland of Kennebunkport, with wooded lots, small farms and quiet roads between Biddeford and Kennebunk. Public water is limited, so private wells are the norm for most houses in town.
Kennebunk, Kennebunkport, Biddeford, Lyman and Dayton surround the town, which keeps it close to several service routes. A buyer should ask for the well depth, the pump age and the last bacteria, arsenic and radon results before closing.
What we see in York County wells
Inland wells in York County mix sand and gravel with glacial till and bedrock, so two neighbors near Arundel's rural roads between the Kennebunk and Saco areas can have very different water. Drilled wells tend toward dissolved metals, while shallower ones carry more sediment and organic color. A filter train in Arundel is only as good as the test behind it.
What to test first in Arundel
- Hardness, because it decides whether a softener belongs on the same line
- Tannins or color, if the water looks tea-stained after rain
- Sodium and chloride if the well sits near salt water
How it works
How we handle whole-house water filtration, step by step
- 1
Read the lab report
A fresh report from a Arundel well tells us what the filter must do. If you do not have one, we collect a sample and send it to the lab first, then plan the system around the results.
- 2
Design the filter train
With results in hand we pick the stages and the order they run in. Sediment comes first, then the media bed, and any polishing or disinfection after, all sized to the household's peak flow.
- 3
Install at the entry point
Installation means mounting tanks level, connecting supply and drain, programming the control head and flushing the new media. Work in a Arundel basement is kept neat, with valves labeled and reachable.
- 4
Verify and maintain
After startup we retest the treated water to confirm the system does what the design said it would. You get a plain explanation of filter changes, backwash schedule and what to watch for.
What shapes the job in Arundel
Filtration often works alongside other equipment. Ultraviolet light, a softener or an acid neutralizer may share the wall with it, and the order they go in changes how well each one works. We lay out the whole line near Arundel's rural roads between the Kennebunk and Saco areas, not one tank at a time.
Signs a whole-house filter may help
- Rust-colored laundry that does not come clean
- Grit collecting in faucet aerators and shower heads
- A water heater that needs frequent flushing
- A well that has never been tested
If you are in Arundel, or nearby in Kennebunkport or Saco, and want to talk filtration, call or send a request. We will start with the water and go from there.
Other services in Arundel
Whole-House Water Filtration nearby
Whole-House Water Filtration in Arundel?
Start with a test. We will explain the results in plain language and only recommend what the numbers support.